DAMP FLOOR SURFACE TREATMENTS for porous floor slabs


SKU: ZCIWJ34AP Category:


LABS offers the Microsealer and the Technocryl 2001 as damp floor surface treatments to repel water which could lead to damp. These damp floor surface treatments are best used in combination with concrete which has porous qualities. In a basement, it is recommended that a new slab with a concrete mix which minimal porous qualities.

Wykamol Microsealer

Wykamol Microsealer is applied to concrete and cures to form a water repellent surface which is resistant to lime efflorescence.

  • Odourless solution
  • Reduces dusting of old and new concrete
  • Improves surface wear characteristics extending the life of the floor
  • Reduces penetration of water and oil
  • Prevents lime efflorescence which blocks drainage channels in a Type C waterproofing application
  • Easy to apply
  • Long lasting active ingredient
  • Highly penetrating


Technocryl 2001

Cement based floor mixes incorporating proprietary acrylic additive to improve bearing capacity, wet and dry abrasion resistance, impact resistance, water, chemical and grease resistance, adhesion and ease of laying, allowing thinner screeds and fewer expansion joints. Water based acrylic co-polymer dispersion.

  • Heavy industrial, food processing and agricultural floors, including effluent tanks.
  • Areas with continuous or intermittent water contact.
  • Improved wear resistance in both wet or dry conditions
  • Improved resistance to grease and oil damage
  • Good impact resistance
  • Excellent load bearing properties
  • Allows heavy duty screeds to be laid safely at 6- 12 mm thickness as opposed to typical 38-50mm
  • No hacking of the sub-floors is needed – except on badly contaminated or weak substrates
  • Excellent adhesion
  • Fewer expansion joints needed due to resilience of the topping
  • No special equipment needed; the flooring mixes are drier than normal, but applications may be carried out using conventional methods.
  • Addition of Technocryl 2001 to cement-based floor mixes of all descriptions, whether externally or internally, provides major improvements in durability and ease of laying.

For any further information on these products, please contact LABS on 01142302865 or email on admin@l-a-b-s.co.uk

Additional information

Weight1 kg



There are no reviews yet.

Be the first to review “DAMP FLOOR SURFACE TREATMENTS for porous floor slabs”

Your email address will not be published. Required fields are marked *